Marking Machines
Bar stock marking means marking the full bar length of hex, round or square stock before machining parts from the bar in a Screw Machine or Turning Center. Typical parts include fittings, spud orifices, and flow controllers. Bars can be marked on 1,2,3,4,5, or 6 sides either while being straightened or from coil or after cutting to bar lengths.
The Model 6000 Bar Marker
- Eliminates wasted floor space
- The Model 6000 Bar is mounted on locking casters
- Move the bar marker to the stock rather than handle the stock
- Manual load, with autofeed @ 2-feet per second.
- Handles Hex, Round & Square stock from 7/16" to 2".
- Can be customized for special shapes.
- Interchangeable Bar stock marking Dies made to your specifications.
- Adjustable marking depths.
- View PDF
The Model 6400 Bar Marker
- Enables the marking of four sides of hex stock in one pass.
- Handles Hex stock from 7/16" to 2".
- Interchangeable Bar stock marking Dies made to your specifications.
- Adjustable marking depths.
- View PDF
The Optional Auto-Unloader
- Increases productivity by enabling a single operator to mark and unload the stock.
- Can be used with both the Model 6000 & Model 6400.
- The 6500 and 6700 are examples of inline Bar stock marking machines marking bar as it is straightened from coil.