Bar stock marking means marking the full bar length of hex, round or square stock before machining parts from the bar in a Screw Machine or Turning Center. Typical parts include fittings, spud orifices, and flow controllers. Bars can be marked on 1,2,3,4,5, or 6 sides either while being straightened or from coil or after cutting to bar lengths.

Bar stock marking and O.D. roll marking dies can be reworked with our "Regrave" process. Please contact us for specific details. 

The Model 6000 Bar Marker  
  • Eliminates wasted floor space.
  • The Model 6000 Bar is mounted on locking casters.
  • Move the bar marker to the stock rather than handle the stock.
  • Manual load, with autofeed @ 2-feet per second.
  • Handles Hex, Round & Square stock from 7/16" to 2".
  • Can be customized for special shapes.
  • Interchangeable Bar stock marking Dies made to your specifications.
  • Adjustable marking depths.
 
View PDF  
   
The Model 6400 Bar Marker  
  • Enables the marking of four sides of hex stock in one pass.
  • Handles Hex stock from 7/16" to 2".
  • Interchangeable Bar stock marking Dies made to your specifications.
  • Adjustable marking depths
 
View PDF  
VIEW 3D MODEL 

 
   
The Optional Auto-Unloader  
Increases productivity by enabling a single operator to mark and unload the stock.
Can be used with both the Model 6000 & Model 6400.
The 6500 and 6700 are examples of inline Bar stock marking
machines marking bar as it is straightened from coil.